A range of additional products designed to support niche coating applications, offering specialized performance based on specific industry needs.
Chlorub 20 is a chlorinated rubber primarily used in adhesives. It has excellent film-forming capabilities and is a non-flammable, non-toxic, tasteless white powder.
Cerfobol R 75 is a water-repelling (hydrophobic) agent suitable for waterborne paints, textured coatings, and wall primers. It is a water-based emulsion of organic polymers with a high water-repelling effect. Primarily used in decorative paints, interior and exterior water-based paints, and plasters.
CP 90602 PA is a versatile and economical-grade car putty resin suitable for hand application. It offers good sandability when cured with peroxides at ambient temperature.
Hikotack P-120 is a pale yellow adhesive tackifier resin made from C9 hydrocarbon resin. It is a thermoplastic material designed for use as a vehicle for inks and paints, a tackifier for solvent-based adhesives, a water-repellent agent, a concrete curing agent, and a binder for asphalt.
Hikorez R-1100S is thermoplastic and was designed for use as a binder for hot melt road marking. It exhibits superior processability and ease of compounding.
Hikorez® H-2100 is a C5/cyclic hydrocarbon resin-based tackifier. It is a light-colored thermoplastic resin that shows good compatibility with base polymers such as SIS and EVA. It is used in sealants, hot melt, pressure-sensitive solvent adhesives, and tapes.
Mowital® B 30 H acts as a binder. It provides better plasticizing properties and has low-viscosity polyvinyl butyral (PVB). It serves as a binder for coatings, printing inks, textile printing, non-woven applications, and as a co-binder for powder coatings. It is available as a fine-grained, free-flowing white powder.
Mowital® B 30 H offers resistance to light and water and is heat-sealable at temperatures above 120°C. It is suitable for the manufacture of pigment concentrates and preparations. It is designed for strippable lacquers, flexographic and gravure printing inks. It is also used in coatings, including adhesion promotion, corrosion protection primers, shop primers, wash primers, stoving enamels, varnishes, and lacquers for different substrates.
Mowital® B 60 H is a low-viscosity polyvinyl butyral (PVB) available as a fine-grained, free-flowing powder. It acts as a binder for coatings, printing inks, textile printing, non-woven applications, and as a co-binder for powder coatings.
Mowital® B 60 H exhibits very good adhesion, enhanced plasticizing properties, and excellent pigment wetting. It offers resistance to light and water and is heat-sealable at temperatures above 120°C. It is suitable for the manufacture of pigment concentrates and preparations.
Mowital® B 60 H is designed for strippable lacquers, flexographic and gravure printing inks. It is also used in coatings, including adhesion promotion, corrosion protection primers, shop primers, wash primers, stoving enamels, varnishes, and lacquers for different substrates.
Maleic anhydride is used in the manufacture of unsaturated polyester resins (UPR). Chopped glass fibers are added to UPR to produce fiberglass-reinforced plastics, which are used in a wide range of applications such as pleasure boats, bathroom fixtures, automobiles, tanks, and pipes.
Phthalic anhydride is primarily used in the production of polyester resins, with additional applications in the manufacture of alkyd resins for paints and lacquers, insect repellents, and urethane polyester polyols. It is also used as a rubber scorch inhibitor and retarder.
Have a question or need assistance? Reach out to us, and our team will get back to you promptly. We’re here to support you with the right solutions and expert guidance.
